« | »

Warwickshire’s MacNeillie Command Support Unit – Dripping With Technology

Warwickshire Fire and Rescue Service has taken delivery of a MacNeillie Command Support Unit – one of the most advanced available – from the market-leading specialist vehicle converter.

68552macn 273x320

The company is now one of the country’s largest bodybuilder and vehicle integrators serving the emergency services, defence and security sectors.

The Warwickshire Fire & Rescue MacNeillie Command Support Unit is a further example of the company’s next generation advanced command and control design.

Now click below for more on Warwickshire’s MacNeillie Command Support Unit …

All systems are fully integrated within the compact overall dimensions of an extra long wheel base high roof Mercedes Sprinter 515 CDI panel van.  In transit mode, the vehicle can carry a crew of up to five, with the three rear cabin seats being suitable for forward facing travel – or swivelled for use at workstations.

The control room area is fitted with two fully equipped IT desk and screen display positions down the offside of the vehicle.

68552macn a 427x312

A full height 19” rack is installed on the nearside of the vehicle, which carries all the electronics required to run the MacNeillie Command Support Unit functionality.  An adjacent half height 19” rack houses the computer systems required to operate further functionality within the vehicle.

A robust, heavy duty awning system is fitted to the nearside of the vehicle extending rearwards from the cab door.

When erected, it can be enclosed with separately attached side, front and skirt panels to create a 4.6m x 3.0m external briefing area.  A 40” external display screen is mounted on the nearside of the vehicle within the awning area and an adjacent fold-out workstation is available for the Incident Commander if required.

The unit can be fully self-sufficient in operation and carries an 8.0kW mains generator set, which is capable of running all onboard systems and equipment.  Input provision for external power is also included via a fully protected mains distribution board.

The rear doors open to reveal a generous equipment compartment, the roof section of which is reinforced to carry a satellite dish if required.

Apart from normal audio visual warning and conspicuity equipment, the unit also carries a public address system.

Externally, the communications antennae, for VHF, Airwave and 3G, are mounted on a 1.8 metre extendable Clark mast, together with a red / white incident control beacon.

MacNeillie Sales and Business Development Manager, Phil Peel told Tachoblog, “The systems and technology which we are now able to build into these units significantly enhances incident management and communications capability, as well as enabling critical decisions to be made with much better and more detailed levels of real-time information.

“In addition, the unit can act as a central co-ordinating hub for inter-agency and external communications channels which might be required, particularly during the emergency stages of a major incident.”

The new Command Support Unit, which replaces a much older vehicle, will normally deploy to any incident in Warwickshire Fire and Rescue Service’s area where five or more appliances are in attendance. The unit was formally handed over at a commissioning event attended by Warwickshire councillors.

Posted by on July 24, 2012.

Tags: , ,

Categories: General, Manufacturers

0 Responses

Leave a Reply

Comment moderation is enabled. Your comment may take some time to appear.

« | »

Recent Posts


About Tachoblog

You can contact Tachoblog like this: For general emails, please send them to contact@tachoblog.com. If you’ve got anything that you think should be a post on Tachoblog, then please email: mystuff@tachoblog.com. To advertise on Tachoblog, please email: ads@tachoblog.com. Finally, if you’re on Twitter then you can find Tachoblog and follow our tweets using Tachoblog’s Twitter [...]more →

Switch to our desktop site